CGA Nuts & Nipples, and Adapters

Unisource offers CGA nuts & nipples, and other similar accessories in bulk, however we also offer all of these options installed on our hose assemblies. CGA nuts, nipples, check valve nipples, hand-tites, elbows, and brass extensions and other adapters can be installed and tightened, and sealed on the hose assembly prior to pressure testing, then cleaned for O2 service and packaged with the hose assemblies. This process not only saves the installer time, but insures that the entire assembly, including CGA fittings are pressure tested and ready for use. CGA nuts & nipples are sourced in the United States.

For hose pigtails, see our PTFE & ETFE Core Flexible Hose Pigtail section and our Flexible All-Metallic Hose Pigtail section.

Unisource is a member of the Compressed Gas Association (CGA), the leading organization for the development of safety standards in the gas industry.

CGA handtite on hose

BEL-4HP Brass 90 Degree Elbow

Brass CGA Nut & Nipple

Brass or Plastic CGA Hand Tight Nut & Nipple

CGA Hand Tight Nut & Soft Tip Nipple

Brass CGA Nut & Check Valve Nipple

90 degree elbow for pigtails
CGA Nipple
CGA Hand-Tite nut and nipple
CGA soft tip nipple
SGA check valve nipple

BEL-4HP 90 Degree elbows may be purchased separately, or can be installed and pressure tested onto your pigtail assembly.

1/4” Female NPT each end. Rated for 3000 PSIG.

Brass CGA nut & nipple combinations may be purchased separately, or can be installed and pressure tested onto your pigtail assembly.

1/4” Male NPT. Rated for 3000 PSIG.

Plastic CGA nut & nipple combinations may be purchased separately, or can be installed and pressure tested onto your pigtail assembly.

1/4” Male NPT. Rated for 3000 PSIG.

Plastic or Brass CGA nut & soft tip nipple combinations may be purchased separately, or can be installed and pressure tested onto your pigtail assembly.

1/4” Male NPT. Rated for 3000 PSIG.

Brass CGA nut and check valve nipple may be purchased separately, or can be installed and pressure tested onto your pigtail assembly.

1/4” Male NPT. Rated for 3000 PSIG.

Block
Want to speak to a professional?

THANK YOU FOR TAKING THE TIME TO VISIT OUR SITE. OUR CUSTOMER SERVICE TEAM IS AVAILABLE TO ASSIST YOU MONDAY THROUGH FRIDAY, 8 A.M. TO 5 P.M. FOR ADDITIONAL INFORMATION PERTAINING TO THE SERVICES OR PRODUCTS THAT WE PROVIDE OR IF YOU NEED AN ESTIMATE, CONTACT ONE OF OUR OFFICES.