Hydraulic Hose Crimpers

Hydraulic hose crimpers and other tooling are the backbone of the Unisource hydraulic line. Our products range from a portable 60-ton hydraulic hose crimper version with a hand-pump option to permanently installed crimpers up to 240-tons. Pumps can be hand operated, pneumatic style or electric/hydraulic. Capabilities for a hydraulic hose crimper go all the way to crimping 2″ two-wire or 1-1-/4″ six-spiral. Count on a wide range of dies and shelving, plus stands. Our hose saws are rated up to 2″ two-wire or 1-1/4″ six-spiral also. For information on making hydraulic hose assemblies, consult our main Hydraulic Hose Catalog. For crimping specifications, contact Unisource.

D160 Portable Hydraulic Hose Crimper

Weighing only 50 lbs, the 60-ton cylinder has the capacity to crimp up to 1-1/4 inch 4-wire hose, and up to 1 inch 6-wire hose. The D160 is a truly portable crimper that can be carried to most any location where service is required. The removable pusher and inverted die position make accurate fitting positioning easy. “Micro Site” indicator assures accurate and repeatable crimps. Base mounting holes allow the crimper to be bench or truck bed mounted if required. Choose either the hand or pneumatic 10,000 PSI pump. Hydraulic hose crimpers and pumps also available separately. Dies available from 7mm to 39mm are ordered separately.

Material High-strength aluminum flanges and tubular frame
For Hose I.D. Up to 1-1/4″ 2 or 4 wire; Up to 1″ six wire
Pump Hand or pneumatic/oil 10,000 psi
Dies 7mm to 39mm
hydraulic hose crimper

D100-01 Dual-Stage Hand Pump and D100-02 Pneumatic/Oil Foot Pump

VHP 10,000 Series ValPower® Series Hand Pump. VHP 10,000 Series ValPower® Series Pneumatic Pump.

hand pump for crimper
foot pump for hydraulic crimper

D105-101431 Optional Shelf

Optional die shelf.

Hydraulic hose crimper dies

D165 60-Ton Hydraulic Hose Crimper

The D165 hydraulic hose crimper has the capacity to crimp up to 1-1/4 inch 4-wire hose and up to 1 inch 6-wire hose. This crimper is designed for higher production requirements. Utilizes an electric/hydraulic 1 HP pump. The removable pusher and inverted die position make accurate fitting positioning easy. “Micro Site” indicator assures accurate and repeatable crimps. Base mounting holes allow the crimper to be bench or truck bed mounted if required. Dies available from 7mm to 39mm are ordered separately.

Features
  • Color-coded dies
  • 1HP 110 Volt ValPower® pump
  • Remote start/stop switch
  • Fully adjustable micrometer style crimp settings to accommodate a wide range of hose and fittings without the need for special shims and spacers.
  • Built-in retraction stop for faster crimping
  • Available fitting stop for faster repetitive crimps
  • Metric Micrometer / Standard
  • Automatic shut off for precise, repeatable crimps
  • Complete range of dies available
Hydraulic hose crimper
Accessories
  • Optional die storage shelf available (not included)

CC30/220 V – 155 Ton Horizontal Hydraulic Hose Crimper

An ideal fit for many small shops where space is at a premium and the ability to crimp a wide variety of hose and fittings is needed. The increased capacity while still maintaining a compact head size and small footprint is made possible by the use of the 11,000 PSI pump and improved design of the internal head components. 155 ton crimping force can crimp up to 2 inch 2 wire hose or 1-1/4 inch 6 wire hose. Large 4.9 inch throat opening allows right angle and special fittings to be inserted from the rear of the crimper.

Features
  • 155 Ton Crimping force available (Crimp up to 2 inch 2 wire hose)
  • Large 125 mm (4.9 inch) throat opening for right angle and special fittings
  • 11,000 psi ValPower® pump produces maximum force in a small package
  • Precise, direct reading digital adjustment makes precise crimping settings simple
  • Retraction stop limits die travel for faster repetitive crimps (est. 500 assemblies / hr)
  • Protective foam pads prevent debris from damaging interior surfaces
  • Hold/Retract valve allows operator to jog and hold at any point during set up
  • Manual/Automatic cycle options
  • Large oil reservoir keeps components cool during repetitive crimping cycles
  • 110V or 220V single phase power options available
Accessories
  • Optional Die Storage Rack keeps dies organized and readily available.
  • Optional magnetic die change tool makes changing dies a quick “no mess” operation.
hydraulic hose crimper

CC30-102616-84MM Die Holder

Nine station die holder

die holder

CC150 240-Ton Production Crimper

A high production crimper. 240 ton crimping force can crimp up to 2 inch 2 wire hose or 1-1/4 inch or 6 wire hose. Large 4.7 inch throat opening allows right angle and special fittings to be inserted from the rear of the crimper. Powerful five HP 230 V, 3-phase pump. Optional nine station die holder.

Features
  • Hose capacity up to 1-1/2 inch 6 wire hose and 2 inch 4 wire hose
  • Complete range of dies and accessories available
  • Master die inside diameter: 84 mm
  • Maximum die opening: die closed diameter + 38 mm
  • Direct reading metric micrometer
  • Automatic shut off assures repeatability
  • 5 HP hydraulic pump (8 gallon)
  • 230 Volt 3 phase pump standard
  • 440 Volt 3 phase pump optional
  • ISO 46 hydraulic oil reservoir to keep components cool during operation
  • Size: L 29″ X W 20″ X H 28″
Accessories
  • Optional Die Storage Rack keeps dies organized and readily available.
  • Magnetic die change tool (included) makes changing dies a quick “no mess” operation.
Hydraulic hose crimper

Uniflex UA4 – 135 Ton Crimper

The powerful workshop UA4 crimper with its capability to crimp a wide range of hoses, up to 1-1/2 inch 4-wire or 1-1/4 inch 6-wire (even two piece versions) offers maximum flexibility at a great value. The open, horizontally slideable compression dies spring open to facilitate crimping of short 90° fittings with long necks. Thanks to the standard-equipped 110-115V single-phase power unit, the UA4 is ready for operation globally.

This crimper is also equipped with the legendary GREASELESS slide bearing technology.

 

Features
  • 110-115V Single phase power unit
  • Crimp up to 1-1/2” 4-wire or up to 1-1/4” 6-wire
  • Pump is electric/hydraulic – 1HP
  • Dies from 9mm to 57mm
  • Greaseless slide bearing technology
Accessories
  • Optional UA4-Stand Crimper Stand
Hydraulic hose crimper
Crimper stand

Optional UA4-Stand

Uniflex S4 Ecoline – 180 Ton Hydraulic Hose Crimper

Greaseless production crimper, self-contained unit with 230V 3-phase power. The service crimper features a crimp force of 180-tons and is designed for a crimp range of up to 70mm. It’s the perfect choice for hydraulic hose assemblies up to 1-1/2 inch and for industrial hose assemblies up to 2 inch. This hydraulic hose crimper is also equipped with the legendary greaseless slide bearing technology.

Features
  • 230V 3-phase power
  • Crimps up to 2 inch 4-spiral hose or up to 1-1/2 inch R15
  • Electric/hydraulic pump
  • Dies from 9mm to 62mm
  • 180-ton crimp force
  • Greaseless slide bearing technology
Accessories
  • Optional S4-Stand crimper stand
135 ton crimper

Optional UA4-Stand

HS300 & HS500 Hose Saws

HS300 is a 3 HP hose saw capable of cutting up to 2 inch two-wire hose or up to 1-1/4 inch 6-wire hose. HS500 is a 5 HP hose saw that can cut up to 2 inch two-wire hose or up to 2 inch 6-wire hose. Standard in 230V, 3 phase. Counter keeps track of the number of cuts made and is easily reset to zero. Optional serrated blade or smooth blade. Other options include the Mister Kit which sprays a fine mist of air tool oil on the blade, an adjustable Hose Channel for measuring and supporting the hose, and a Hose Helper to hold the hose in position.

hydraulic hose saw
Block
Want to speak to a professional?

THANK YOU FOR TAKING THE TIME TO VISIT OUR SITE. OUR CUSTOMER SERVICE TEAM IS AVAILABLE TO ASSIST YOU MONDAY THROUGH FRIDAY, 8 A.M. TO 5 P.M. FOR ADDITIONAL INFORMATION PERTAINING TO THE SERVICES OR PRODUCTS THAT WE PROVIDE OR IF YOU NEED AN ESTIMATE, CONTACT ONE OF OUR OFFICES.