Chemical hose for oilfield and fracking applications refers to the hose assemblies that convey the high-concentration chemicals, as opposed to blended fluids. Unisource Series 2410 UHMW chemical hose is compatible with 98% of the most common chemicals without leaching and contaminating the product being conveyed. Series 2450 is our ultimate chemical hose and the choice where only a fluoropolymer lined hose will be sufficient due to chemical type or temperature. This hose is lined with smooth-bore FEP and backed with XLPE. Both hose specs have textile reinforcing and a dual helix wire for vacuum rating.
Chemical hose for oilfield and fracking is used for transfer of aggressive chemicals to hydraulic fracturing blenders in high-pressure, suction, or gravity-flow applications. For a look at our complete line of chemical hoses, refer to our Chemical Hose section. Also check out our Frac Hose section for hoses intended for general service fracking solutions. To return to the Oil & Gas Industry Products, click here.
Series 2410 UHMW Chemical Hose
Tube:
Ultra high molecular weight polyethylene
Cover:
Corrugated Blue EPDM
Reinforcement:
Multiple textile plies with dual wire helix
Temperature Range:
-40 Deg. F. to 212 Deg. F.
Branding:
Yellow Mylar / Blue letters
Applications:
The Ultra High Molecular Weight (UHMW) polyethylene tube will handle 98% of the most common chemicals without leaching and contaminating the product being conveyed. Refer to the chemical guide to determine compatibility with chemicals and applications.
| Part Number | I.D. (In) | O.D. (In) | Bend Radius (In) | W.P. (PSIG) | Weight (Lbs / Ft) | Std. Length | Stock (Yes) or Min. Order |
|---|---|---|---|---|---|---|---|
| 2410-075 | 3/4 | 1.22 | 3.5 | 200 | .42 | 100’/200' | Yes |
| 2410-100 | 1 | 1.46 | 4.0 | 200 | .48 | 100’/200' | Yes |
| 2410-125 | 1-1/4 | 1.77 | 4.0 | 200 | .71 | 100’/200' | Yes |
| 2410-150 | 1-1/2 | 2.01 | 5.0 | 200 | .81 | 100’/200' | Yes |
| 2410-200 | 2 | 2.56 | 6.0 | 200 | 1.17 | 100’/200' | Yes |
| 2410-250 | 2-1/2 | 3.11 | 8.0 | 200 | 1.70 | 100’/200' | Yes |
| 2410-300 | 3 | 3.62 | 9.0 | 200 | 2.01 | 100’/200' | Yes |
| 2410-400 | 4 | 4.65 | 10.0 | 150 | 2.75 | 100' | Yes |
| 2410-600 | 6 | 6.77 | 20.0 | 150 | 5.60 | 100' | Yes |
Series 2450 FEP Lined Rubber Hose
Tube:
(FEP) backed with modified XLPE
Cover:
Blue EPDM
Reinforcement:
Multiple textile plies w/ dual wire helix
Temperature Range:
-40 Deg. F. to 300 Deg. F
Branding:
White Mylar / Black letter
W.P. Design Factor:
4:1
Applications:
Recommended for the transfer of products that require a hose tube with the highest level of chemical resistance. The smooth-bore design is ideal for the unrestricted transfer of fluids and promotes draining and cleaning. The hose is reinforced with multiple plies of polyester yarn with dual wire helix. This reinforcing combination provides full vacuum capabilities, kink resistance, and high working pressure ratings. Other cover colors are available (red, black , gray, yellow, green and white). Meets or exceeds the requirements of FDA & USDA under 21 CFR 177, 1550, 3-A sanitary standards 10-15.
| Part Number | I.D. (In) | O.D. (In) | Bend Radius (In) | W.P. @70° F (PSIG) | Vacuum @70° F (In/Hg) | Weight (Lbs/Ft) | Std. Length | Stock (Yes) or Min. Order |
|---|---|---|---|---|---|---|---|---|
| 2450-075 | 3/4 | 1.29 | 4.0 | 200 | 30 | .52 | 100’ | 400’ |
| 2450-100 | 1 | 1.56 | 5.0 | 200 | 30 | .63 | 100’ | 400’ |
| 2450-150 | 1 1/2 | 2.05 | 8.0 | 200 | 30 | .93 | 100’ | 400’ |
| 2450-200 | 2 | 2.55 | 9.0 | 200 | 30 | 1.14 | 100’ | 400’ |
| 2450-300 | 3 | 3.59 | 18.0 | 150 | 30 | 1.77 | 100’ | 400’ |
