Fire engine pump hose and fire engine booster hose are critical hoses used in firefighting. Unisource fire engine pump hose is a hard-wall hose carried on fire engines, mainly used as a suction hose. Our Series 2618 hose has dual use as a suction hose and a high-pressure hose, with a working pressure of 300 PSIG.
Our fire engine booster hose is a rugged front-line attack hose typically installed on reels on the fire engine. The hose can be rapidly pressurized and charged for emergency first-response use. Unisource offers two fire engine booster hoses. Our Series 2670 is a red rubber hose rated for 800 PSIG W.P., while Series 2671 is rated for 1000 PSIG. Both hoses are built to resist abrasion, gouging, weathering, and ozone. Both hoses are produced in 3/4-inch and 1-inch size and in 100-foot lengths. Unisource fire engine booster hose meets UL92 specifications and also meets NFPA 1961 requirements.
Check out our Rubber Suction & Discharge Hose section for information on other types of water hose.
Series 2618 Fire Engine Pump Hose
Tube:
Black EPDM blend
Cover:
Black EPDM blend
Reinforcing:
Multiple textile plies w/dual wire helix
Temperature Range:
-30 Deg. F. to 200 Deg. F.
Design Factor:
4:1
Branding:
Embossed
Applications:
Series 2618 is a premium quality, heavy-duty fire engine suction & discharge hose. This hose is designed for severe applications requiring endurance and higher pressure ratings. The unique design allows for extreme flexibility, and high kink resistance when making tight bends. The tough, flexible EPDM synthetic rubber provides resistance to abrasion, weathering, and heat.
| Part Number | I.D. (In) | O.D. (In) | Bend Radius (In) | W.P. (PSIG) | Weight (Lbs / Ft) | Std. Length | Stock (Yes) or Min. Order |
|---|---|---|---|---|---|---|---|
| 2618-100 | 1 | 1.56 | 4.0 | 300 | .70 | 100’ | 400' |
| 2618-150 | 1-1/2 | 2.06 | 5.0 | 300 | 1.07 | 100’ | 400' |
| 2618-200 | 2 | 2.56 | 6.0 | 300 | 1.51 | 100’ | 400' |
| 2618-250 | 2-1/2 | 3.15 | 7.0 | 300 | 2.11 | 100’ | 400' |
| 2618-300 | 3 | 3.70 | 8.0 | 300 | 2.41 | 100’ | 400' |
| 2618-400 | 4 | 4.75 | 10.0 | 300 | 3.71 | 100’ | 400' |
| 2618-500 | 5 | 5.75 | 14.0 | 300 | 5.10 | 100’ | 400' |
Series 2670 800 PSI Booster Hose
Tube:
Synthetic rubber
Cover:
Red synthetic rubber
Reinforcing:
Multiple textile braids
Temperature Range:
0 Deg. F. to 180 Deg. F.
Branding:
Inkjet – white letters
Origin:
USA
Applications:
This is a heavy duty hose for high pressure water booster service on fire engines. Tube and cover compounds resist abrasion and weathering. Tough yet flexible, for resistance to flexing and surge loads. Meets NFPA 1961 requirements under current RMA specifications. Meets or exceeds UL92 requirements for 800 PSI Booster Hose.
| Part Number | I.D. (In) | O.D. (In) | W.P. (PSIG) | Weight (Lbs / Ft) | Std. Length | Stock (Yes) or Min. Order |
|---|---|---|---|---|---|---|
| 2670-075 | 3/4 | 1.25 | 800 | .40 | 100' | Yes |
| 2670-100 | 1 | 1.53 | 800 | .56 | 100' | Yes |
Series 2671 Fire Engine Booster Hose – 1000 PSI
Tube:
Synthetic rubber
Cover:
Red synthetic rubber
Reinforcing:
Multiple textile braids
Temperature Range:
0 Deg. F. to 180 Deg. F.
Branding:
Ink brand–white letters
Origin:
USA
Applications:
This is a heavy duty hose for high pressure water booster service on fire engines. Tube and cover compounds resist abrasion and weathering. Tough yet flexible, for resistance to flexing and surge loads. Meets NFPA 1961 requirements under current RMA specifications. Meets or exceeds UL92 requirements for 800 PSI Booster Hose. Hose is non-conductive.
| Part Number | I.D. (In) | O.D. (In) | W.P. (PSIG) | Weight (Lbs / Ft) | Std. Length | Stock (Yes) or Min. Order |
|---|---|---|---|---|---|---|
| 2671-075 | 3/4 | 1.25 | 1000 | .40 | 100' | Yes |
| 2671-100 | 1 | 1.53 | 1000 | .56 | 100' | Yes |
