Rubber Suction & Discharge Hose

Unisource offers rubber water suction hose and discharge hose in a large selection of rugged and durable specs made from a variety of rubber blends. We also produce canvas covered discharge hoses with rubber liners, providing a durable, yet light weight option. If your applications are located in cold-weather zones, choose our low-temp rated hoses in order to preserve flexibility. Rubber suction and discharge hose provides particular advantages over PVC and PVC blend options. First, rubber suction and discharge hose is built with an abrasion resistant rubber cover. This cover will also be resistant to ozone and weathering. Count on rubber hoses to outlast PVC options by a considerable margin. Another advantage of rubber suction and discharge hose is that unlike PVC hose, it maintains it’s bend radius and ease of bending even in frigid weather. One the other end of the extreme, rubber hoses can be used in higher temperature applications than PVC–180-200 Deg. F., depending on the particular hose. For construction and rental applications where very large diameter hose is needed, rubber suction and discharge hoses are typically in stock through 12-inch diameter. Where high-pressure are required, Unisource rubber hoses have ratings as high as 200 PSIG working pressure–much higher than PVC hose options.

If light weight and cost are paramount, check out our line of PVC Water Suction & Discharge Hose section. Also, Unisource builds the industry’s finest hoses designed specifically for agricultural irrigation uses. Check out our Irrigation Hose section to see these specs.

Series 2610 Corrugated Rubber Water Suction & Discharge Hose

Tube:

Black EPDM / SBR blend

Cover:

Corrugated Black EPDM / SBR blend

Reinforcing:

Multiple textile plies w/dual wire helix

Temperature Range:

-20 Deg. F. to 180 Deg. F.

Branding:

Blue Mylar / White letters

Applications:

Series 2610 is a general purpose water suction and discharge hose for applications such as construction and agriculture. The special corrugated cover provides for improved flexibility.

Part
Number
I.D.
(In)
O.D.
(In)
Bend
Radius (In)
W.P.
(PSIG)
Weight
(Lbs / Ft)
Std.
Length
Stock (Yes)
or Min. Order
2610-60066.6118.01505.50100'Yes
2610-80088.7024.01507.5020’/25’Yes
2610-10001010.8730.015010.0020’/25’Yes
2610-12001212.8740.015012.0020’/25’Yes

Note: Soft cuffs available upon request

Series 2612 Rubber Water Suction & Discharge Hose

Tube:

Black EPDM blend

Cover:

Black EPDM blend

Reinforcing:

Multiple textile plies w/dual wire helix

Temperature Range:

-20 Deg. F. to 200 Deg. F.

Branding:

Green Mylar / White letters

Applications:

This water suction hose is designed to handle a wide range of applications in industry, construction, and agriculture. The tough, flexible EPDM rubber construction will resist abrasion, weathering and the effects of agricultural herbicides and other mild chemicals. Incorporates a steel dual wire helix in the hose wall for full suction capabilities as well as high tensile tire cord fabric for discharge pressure.

Part
Number
I.D.
(In)
O.D.
(In)
Bend
Radius (In)
W.P.
(PSIG)
Weight
(Lbs / Ft)
Std.
Length
Stock (Yes)
or Min. Order
2612-10011.393.0150.54100’/200’ Yes
2612-1251-1/41.675.0150.64100’/200’ Yes
2612-1501-1/21.916.0150.72100’/200’ Yes
2612-20022.467.01501.08100’/200’ Yes
2612-2502-1/22.9510.01501.48100’/200’ Yes
2612-30033.4914.01501.80100’/200’ Yes
2612-40044.6114.01502.43100’/200’ Yes
2612-60066.5730.01504.16100' Yes
2612-80088.7438.01509.32 20’ Yes
2612-10001010.8750.015012.40 20’ Yes
2612-12001212.8766.015016.70 20’ Yes

Series 2633 Medium Duty Rubber Water Discharge Hose

Tube:

Black EPDM blend

Cover:

Black EPDM blend

Reinforcing:

Multiple textile plies

Temperature Range:

-20 Deg. F. to 180 Deg. F.

Branding:

Blue Mylar / White letters

Applications:

Light, flexible, and durable–with 150 PSI working pressure in all sizes. This hose is the most versatile choice for many water discharge applications. Tube and cover are flexible EPDM rubber, resistant to weathering and to many light industrial and agricultural chemicals.

Part
Number
I.D.
(In)
O.D.
(In)
PliesW.P.
(PSIG)
Weight
(Lbs / Ft)
Std.
Length
Stock (Yes)
or Min. Order
2633-1501-1/21.802150.52 100’Yes
2633-20022.322150.65 100’Yes
2633-2502-1/22.802150.85 100’Yes
2633-30033.3321501.25 100’Yes
2633-400 44.3321501.65 100’Yes
2633-60066.3421502.8450’/100’Yes
2633-80088.5541504.1550’/100’Yes
2633-1000 1010.5541505.2550’Yes
2633-12001212.5841506.2050’Yes

Series 2634 Heavy Duty Rubber Water Discharge Hose

Tube:

Black SBR

Cover:

Black SBR

Reinforcing:

Multiple textile plies

Temperature Range:

-20 Deg. F. to 180 Deg. F.

Branding:

Embossed

Applications:

Recommended for severe water discharge service in heavy-duty industrial applications. Extra heavy wall for long service life and endurance in physically demanding applications.

Part
Number
I.D.
(In)
O.D.
(In)
PliesW.P.
(PSIG)
Weight
(Lbs / Ft)
Std.
Length
Stock (Yes)
or Min. Order
2634-1501-1/21.85 4200.93 100’ 400’
2634-20022.40 42001.16 100’ 400’
2634-2502-1/22.87 42001.48 100’ 400’
2634-30033.38 42001.73 100’ 400’
2634-40044.41 42002.23 100’ 400’
2634-60066.46 42003.5850’/100’ 200’
2634-80088.46 42004.7250’/100’ 200’
2634-10001010.50 41505.5050’/100’ 200’
2534-12001212.60 41506.8050’/100’ 200’

Series 2635 “Mainline” Premium Water Discharge Hose

water discharge hose
Construction:

Nitrile compound. Both tube and cover are simultaneously extruded to obtain maximum bonding.

Reinforcing:

One ply polyester

Temperature Range:

-36 Deg. F. to 178 Deg. F.

Design Factor:

3:1

Branding:

None

Applications:

Series 2635 is a lay-flat, medium-duty water discharge and wash-down hose that combines the lightweight, compact features of PVC with the durability and abrasion resistance of conventional construction. This hose features a unique one-piece, through-the-weave construction, and attains its working pressure from a synthetic woven textile. Will not mildew or rot, and requires no drying time. Its excellent durability is derived from a high-tensile rubber compound, which completely encases the jacket. Applications include irrigation, washdown, dewatering, coal preparation and utility plants, petrochemical, oil, and gas drilling, jetting and pump discharge, storage tank cleaning, and sewer cleaning. Made in Germany.

Part
Number
I.D
(In)
W.P.
(PSIG)
Weight
(Lbs / Ft)
Std.
Length
Stock (Yes)
or Min. Order
2635-1501-1/2300.26 100'/300'Yes
2635-2002250.36 100’/300'Yes
2635-2502-1/2250.46 100’/300'Yes
2635-3003230.52 100’/300'Yes
2635-4004200.72 100’/300'Yes
2635-60062001.25 50’/100'Yes
2635-80081751.70 50’/100'Yes

Series 2660 Mill Discharge Hose – (250 Test)

mill discharge hose, mill hose
Tube:

Black, natural rubber

Jacket:

White polyester – single jacket

Branding:

Single blue stripe

Applications:

Series 2660 is a heavy-duty, rubber lined, single jacket mill hose. Specially designed for washdown service, plant clean up, and open end discharge service in the construction and industrial marketplace. Not intended for firefighting service.

Part
Number
I.D.
(In)
Bowl
Size (In)
W.P.
(PSIG)
Test
(PSI)
Weight
(Lbs / Ft)
Std.
Length
2660-1501-1/21-11/16125250.1450’/100’
2660-20022-1/4125250.2150’/100’
2660-2502-1/22-11/16125250.2550’/100’
2660-30033-3/8125250.3650’/100’
2660-40044-3/8125250.5450’

Series 2665 Contractors Washdown Hose – Double Jacket

contractors water hose, double jacket
Tube:

Black, natural rubber

Jacket:

White polyester – double jacket

Branding:

Double blue stripe

Applications:

Series 2665 is a heavy duty, rubber lined, contractors washdown hose. The double jacket provides for greater abrasion resistance and higher working pressure. Excellent for washdown and discharge service. Not intended for fire fighting service.

Bulk Hose

Part
Number
I.D.
(In)
Bowl
Size (In)
Test
(PSI)
W.P.
(PSIG)
Weight - 50 ft.
Uncoupled
Std.
Length
CW-1501-1/21-13/1650025015.050'/100'
CW-2502-1/22-7/850025031.050'/100'

Assemblies

Part
Number
DescriptionAssembly
Length
Fittings
A-CW-150-050-XXX1-1/2"50'Aluminum
A-CW-250-050-XXX2-1/2"50'Aluminum

“XXX” = NPSH or NST

Block
Want to speak to a professional?

THANK YOU FOR TAKING THE TIME TO VISIT OUR SITE. OUR CUSTOMER SERVICE TEAM IS AVAILABLE TO ASSIST YOU MONDAY THROUGH FRIDAY, 8 A.M. TO 5 P.M. FOR ADDITIONAL INFORMATION PERTAINING TO THE SERVICES OR PRODUCTS THAT WE PROVIDE OR IF YOU NEED AN ESTIMATE, CONTACT ONE OF OUR OFFICES.