Frac Hose

Frac hose or fracking hose refers to the multi-purpose hoses used at a fracking site. ‘Fracking’ refers to the process of opening rock formations to release natural gases and oil by the use of hydraulic fracturing. Specialized frac hose assemblies are used to transfer necessary fracturing fluids such as water, oil, and hydrochloric acid. Fracking fleets can consist of a variety of oilfield service trucks and tanks that feature applications in which the proper hose can be a problem solver.

Unisource offers five different frac hose specs.

  • Our Series 2270 is a corrugated tank hose’ with hard-wall and rated for 150 PSI W.P.. It can handle brine, crude oil, drilling mud, mild chemicals, petroleum waste, sediments, sludge, and water.
  • Series 2275 frac blender hose’ is rated for 400 PSI W.P. and is a discharge hose with the same material capabilities as above, plus will be called upon to transfer sand slurries. This hose is also available in Series 2275AC–with our exclusive “Armor-Clad” UHMWPE cover for severe abrasion resistance.
  • Series 2285 is our corrugated oilfield suction hose, rated for 150 PSI W.P. and is intended for oilfield waste pit recovery, tank truck service, and oilfield vacuum trucks’.
  • Series 2290 is our highest temperature rated tank truck hose. Rated for 150 PSI W.P. and 350 Deg. F. petroleum products.
  • Finally, Series 2295 is our hot oil transfer hose for high-pressure applications. This hose is rated for 2250 PSI W.P. and 300 Deg. F. intermittent or 275 Deg. F. continuous temperatures. It is wire braid reinforced. Used to clear paraffin around casing piping, tanks and tubing to help begin the flow of oil.

You may also want to check out our web section on Petroleum Hose for Oilfield Applications.

Take a look at our Petroleum Hose web section to see our complete line of rubber hose for every petroleum hose application.

Series 2270 Corrugated Frac Tank Hose – 150 PSI

Tube:

Black Nitrile/SBR

Cover:

Black Nitrile / SBR corrugated

Reinforcing:

Multiple textile plies w/helix wire

Temperature Range:

-40 Deg. F. to 190 Deg. F.

Branding:

Blue Mylar / Black Letters

Applications:

A mainstay of our oil & gas hose products. Heavy duty frac-tank hose designed to handle brine, crude oil, drilling mud, mild chemicals, petroleum waste, sediments, sludge, slurries, and water commonly found in oil field applications. Specially designed for frac tank connections. Not recommended for refined petroleum products.

Part
Number
I.D.
(In)
O.D.
(In)
Bend
Radius (In)
W.P. (PSI)Weight
(Lbs / Ft)
Std.
Length
Stock (Yes)
or Min. Order
2270-80088.9518.01508.20100'Yes

Series 2275 Frac Blender Hose – 400 PSI

Tube:

Black Nitrile/SBR blend

Cover:

Black Neoprene

Reinforcing:

Multiple textile plies

Pressure Range:

-40 Deg. F. to 180 Deg. F.

Branding:

Clear Mylar / White Letter

Note:

Series 2275AC – “Armor Clad” (UHMWPE) Cover also available

Applications:

A rugged versatile discharge hose designed to handle brine, mild chemicals, petroleum waste, sediments, sludge, sand slurries and water in oil field applications such as frac blender and tank service. Also available is Series 2275AC with our exclusive ”Armor Clad” UHMWPE cover compound for severe abrasion resistant applications. Do not use for refined oil or fuel.

Part
Number
I.D.
(In)
O.D.
(In)
W.P.
(PSIG)
Weight
(Lbs / Ft)
Std.
Length
Stock (Yes)
or Min. Order
2275-40044.844002.75100'Yes

Series 2280 Oilfield Suction – Tank Vac

Tube:

Special black fuel resistant synthetic rubber

Cover:

Special black oil resistant cover

Reinforcing:

Multiple textile plies w/dual wire helix

Pressure Range:

-30 Deg. F. to 180 Deg. F.

Branding:

Blue Mylar / Black Letters

Applications:

Series 2280 is a flexible, lightweight suction and discharge hose designed to handle brine, crude oil, mild chemicals, petroleum waste, sediments, sludge, slurries, and water in harsh oil field bottom sediment and waste pit recovery applications. Do not use for refined oil or fuel.

Part
Number
I.D.
(In)
O.D.
(In)
W.P.
(PSIG)
Weight
(Lbs / Ft)
Std.
Length
Stock (Yes)
or Min. Order
2275-40044.844002.75100'Yes

Series 2285 “Cobra” Oilfield Suction – Corrugated Oil & Gas Hose

Tube:

Black Nitrile blend

Cover:

Black SBR (corrugated)

Reinforcing:

Multiple textile plies w/ dual wire helix

Temperature Range:

-40 Deg. F. to 150 Deg. F.

Branding:

Blue Mylar / Black Letters

Applications:

Series 2285 is a flexible oil & gas hose designed for oilfield waste pit recovery, tank truck service, including oilfield vacuum truck. Ideal for applications handling crude oil, salt and fresh water, tank bottoms, drilling mud, dilute solutions of hydrochloric acids and sewage transfer. Do not use with refined oil or fuel.

Part
Number
I.D.
(In)
O.D.
(In)
Bend
Radius (In)
W.P.
(PSI)
Weight
(Lbs / Ft)
Std.
Length
Stock (Yes)
or Min. Order
2280-20022.404.01501.21100'Yes
2280-30033.467.01501.85100'Yes
2280-40044.5310.01002.65100'Yes

Series 2290 Hot Tar & Asphalt Hose / Oil & Gas Hose

Tube:

Black Nitrile (ARPM Class A ORS)

Cover:

Black Neoprene (ARPM Class A ORS)

Reinforcing:

Multiple textile plies w/helix wire

Temperature Range:

-25 Deg. F. to 350 Deg. F.

Branding:

Red Mylar / Black letters

W.P. Design Factor:

4:1

Applications:

Series 2290 is designed for the transfer of high-temperature petroleum-based materials such as tar, asphalt, and hot oils. It is suitable for suction and discharge service on tank trucks, tank cars, or at bulk stations.

Part
Number
I.D.
(In)
O.D.
(In)
Bend
Radius (In)
W.P.
(PSI)
Weight
(Lbs / Ft)
Std.
Length
Stock (Yes)
or Min. Order
2290-30033.657.01501.78100'Yes

Series 2295 Hot Oil Transfer Hose

Tube:

Black Nitrile (Heat & oil resistant)

Cover:

Black Chloroprene (Heat & oil resistant)

Reinforcing:

Multiple wire braids

Temperature Range:

-40 Deg. F. to 275 Deg. F. (300 Deg. F. Intermittent)

Branding:

Embossed layline

W.P. Design Factor:

3:1

Applications:

Series 2295 is a heavy duty, high-pressure hose specifically designed for the transfer of hot oil at 275°F continuous / 300°F intermittent. The cover is highly resistant to abrasion, heat, oil, and weathering. The wire braid reinforcement provides 2250 PSI working pressure. Excellent for asphalt, glue, tar, oil, and wax. In oil drilling applications is used to clear paraffin around casing, piping, tanks and tubing to help begin the flow of oil.

Part
Number
I.D.
(In)
O.D.
(In)
BraidsW.P.
(PSI)
Weight
(Lbs / Ft)
Std.
Length
Stock (Yes)
or Min. Order
2295-1501-1/22.18222501.9050'Yes
Block
Want to speak to a professional?

THANK YOU FOR TAKING THE TIME TO VISIT OUR SITE. OUR CUSTOMER SERVICE TEAM IS AVAILABLE TO ASSIST YOU MONDAY THROUGH FRIDAY, 8 A.M. TO 5 P.M. FOR ADDITIONAL INFORMATION PERTAINING TO THE SERVICES OR PRODUCTS THAT WE PROVIDE OR IF YOU NEED AN ESTIMATE, CONTACT ONE OF OUR OFFICES.